Search the Community
Showing results for tags 'tyre repair geelong'.
Found 1 result
In current times of tight budget pressures brought on by the country's economic state, it would be a wise decision to try to learn some basic auto maintenance skills. If you deal with this and keep your car running for longer, the money you would have spent in your local garage on small issues could be put to better use elsewhere. Checking Your Engine Oil in Your Car: This is a quick and easy procedure that any driver should be able to perform. If the oil level is too high or too low, it can cause a real uproar in your vehicle. To accurately check the oil levels, park your vehicle on flat ground and trust that the engine will cool down. When the car has cooled down, locate the dipstick, wipe it down with a strip of paper, and place it back into the plunge tube. Hold your breath for a few moments after slowly releasing it. Take a look at the levels on the dipstick. The car is allowed if it falls in between high and low grades. If the oil level is too low, top it up in the garage. Checking Your Coolant Level: This is yet another basic task that can be completed by anyone. In terms of where the coolant is stored, each car has its own preferences. Check the guidebook provided by the firm if you are unsure about yours. When you find the coolant holder - trust that the car will cool down before inspecting - you should see "high" and "low" markings on the outside. Ensure that the coolant is located between these two lines. Wheels/Tires Wipe brake dust off on a regular basis: Make a point of clearing any soil that accumulates on the brakes on a regular basis. If you leave this mixture of filth, water, and the heat from the brakes alone, it will harden and attach to your wheels. Use a clammy wipe to remove the "brake dust" for the greatest results. Tire pressure should be checked: If you do this on a regular basis, you may save a lot of money on your gas costs. A vehicle tyre with low pneumatic stress provides increased moving protection from the vehicle, suggesting that the car must work harder - consuming more fuel - to compensate for the low pressing factor impact. Furthermore, a tyre with an incorrect pneumatic force might have a significant impact on the vehicle's overall treatment. Tire Tread: In AUSTRALIA, the maximum track profundity is 1.6mm across 75 percent of the tire's focal point. Many experts in the field agree that once a tyre track depth falls below 3mm, it's time for a change because the amount of grip is drastically reduced. Keep an eye on the track depth of your tyres. You may do this by placing a ten-pence piece between the track and seeing if it is over the perforated speck design along the circuit of the coin. If it is, your tyres are fine. For affordable tyre repair geelong check Norlane Tyre Service