Jump to content

utihakou

Members.
  • Content Count

    70
  • Joined

  • Last visited

Community Reputation

0 Neutral

About utihakou

  • Rank
    Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. It has been confirmed that SVCI ING Nissan diagnostic tool can reprogram HV battery (update HV battery firmware) on Nissan Leaf. Here comes with the related guide, just go ahead to check it. Before operation, please make sure your BAOCHI cloud diagnostic software has been updated to the latest version- SVCI ING V1.7 System requirement: Windows: Windows7/8/10 Android: Android V5.1 above Network: 3G above Then, go to operate as follows. Plug the SVCI ING interface into the vehicle’s OBD and start the vehicle Connect SVCI ING Bluetooth dongle to laptop via USB cable Please refer to the following connection diagram. When the left indicator of the device turns on and the right indicator flashes, that means the connection is normal. Click “Add a Bluetooth device” on the computer The Bluetooth state is on, and the PC will discover the Bluetooth device automatically, and then pair. Run BAOCHI Cloud Diagnostic software Login with your available email and password have been registered Go to “Special functions”-> “All”-> “Re/programming”-> “Nissan/INFINITI/Datsun/GTR”-> “Reprogram”-> “HV Battery” It will take about one minute to program the HV battery. Note: Don’t interrupt any operation. Just wait patiently! When the programming is done, turn ignition OFF/ON several times. Then click “OK” on the screen and clear DTC. Reference: SVCI ING Program Nissan TCM Module Quick Guide Have fun! www.eobdtool.co.uk
  2. After replacing the front windshield for the Honda Civic, you may find a fault called B2A60-54 Static Camera Aiming Incomplete. Use Launch X431 PAD 5 and X431 ADAS PRO can easily solve this problem. Vehicle and devices used: Car model: Honda Civic Type R (2017) Launch X431 PAD V (X431 PAD 5) Launch X431 ADAS PRO Case: Start the car, and the warning lights appear on the dashboard. Guide to solve B2A60-54 Static Camera Aiming Incomplete fault: Make sure the connection between launch devices and vehicle is proper Start to operate on X431 PAD V tablet 1.Perform full diagnosis Select Local Diagnose-> Asian-> HONDA-> 16 PIN DLC-> General (Connect the VCI in WiFi mode) Read out the vehicle info Go to System and Function-> System Topology The B2A60- 54 fault code can be found in the System List Select ADAS Calibration-> ADAS System Scan Click “Start scanning” You can see there is a DTC (B2A60- 54) appears on LDW/ACC Integrated Driver Support system (IDAS) Tap “ENTER” 图7 Record or print the ECU ID info readout 2.Read fault code Select “Read Fault Code”-> Confirm the module info incl. VIN, ECU name/identifier/ SN-> Read out fault code 3.Calibrate IDAS Select “Special Function” When executing the following functions, PHEV, FHEV and RLX Hybrid vehicles must be put into maintenance mode for the engine to run. Refer to the service manual for detailed instructions. Select “Static Camera Aiming” and select the ADAS Calibration equipment (ADAS Pro) Read the on-screen instructions of calibration required and pre-calibration preparation Setup the ADAS Pro with the distance Start the calibration and wait for the static camera aiming is complete Turn the ignition switch off and then turn it on Confirm to save the ADAS report- The calibration result shows success After that, read the fault code again Now there is no trouble code in the Integrated Driver Support System (IDAS), the fault B2A60-54 Static Camera Aiming Incomplete is cleared successfully. Finally, full diagnose to check all systems working normally, and all warnings are also gone. Launch X431 PAD V with Smartbox 3.0 Diagnostic Coding and Programming Tool (One Year Free Update) is available in eobdtool.co.uk. https://www.eobdtool.co.uk/wholesale/launch-x-431-pad-v.html
  3. Godiag GD801 Odomaster can read and write odometer for Chevrolet cars, such as CHEVROLET SUBURBAN 2017- and TRAILBLAZER 2019 A8. Check the newest odometer car list below. Car model: ALERO, ALPHEON, ASTRO, AVALANCHE, AVEO, BLAZER, CAMARO, CAPTIVA, CAVALIER, COBALT, COLORADO, COLORADO HOUR, CORVETTE, CORVETTE GRAND SPORT, CRUZE, EQUINOX, EXPRESS, EXPRESS CUTAWAY, GRAND-AM, HHR, HORNET, IMPALA, INTRIGUE, LACETTI, MALIBU, MALIBU XL, MONTANA, MONTE CARLO, ONIX, ORLANDO, PRISMA, S10, SILVERADO, SONIC, SPARK, SPIN, SUBURBAN, TAHOE, TRAX, TRAILBLAZER, UPLANDER, VECTRA, VENTURE, VOLT Car year: From year 1997 till now Car maker Area Model Year Dashboard Type Read KM Write KM Other function CHEVROLET ALL ALERO 1998-   ✔ ✔   CHEVROLET ALL ALPHEON 2010   ✔ ✔   CHEVROLET ALL ASTRO 2001-   ✔ ✔   CHEVROLET ALL AVALANCHE 2014-   ✔ ✔   CHEVROLET ALL AVALANCHE 2007-   ✔ ✔   CHEVROLET ALL AVALANCHE 2003-2006   ✔ ✔   CHEVROLET ALL AVALANCHE -2002   ✔ ✔   CHEVROLET ALL AVEO     ✔ ✔   CHEVROLET ALL AVEO 2011   ✔ ✔   CHEVROLET ALL BLAZER 2020-   ✔ ✔   CHEVROLET ALL BLAZER 1998   ✔ ✔   CHEVROLET ALL BLAZER 1997-1998   ✔ ✔   CHEVROLET ALL CAMARO 2019   ✔ ✔   CHEVROLET ALL CAMARO 2010-   ✔ ✔   CHEVROLET ALL CAMARO 1999-   ✔ ✔   CHEVROLET ALL CAPTIVA     ✔ ✔   CHEVROLET ALL CAVALIER 2001-2005   ✔ ✔   CHEVROLET ALL COBALT 2012   ✔ ✔   CHEVROLET ALL COBALT 2008-   ✔ ✔   CHEVROLET ALL COBALT 2005-2007   ✔ ✔   CHEVROLET ALL COLORADO 2018-   ✔ ✔   CHEVROLET ALL COLORADO 2005- Type 1 ✔ ✔   CHEVROLET ALL COLORADO 2005- Type 2 ✔ ✔   CHEVROLET ALL COLORADO 2005- Type 3 ✔ ✔   CHEVROLET ALL COLORADO HOUR 2017-   ✔ ✔   CHEVROLET ALL CORVETTE 2017-   ✔ ✔   CHEVROLET ALL CORVETTE 2013-   ✔ ✔   CHEVROLET ALL CORVETTE 2010-   ✔ ✔   CHEVROLET ALL CORVETTE 199-2004   ✔ ✔   CHEVROLET ALL CORVETTE GRAND SPORT 2017-   ✔ ✔   CHEVROLET ALL CRUZE 2017-   ✔ ✔   CHEVROLET ALL CRUZE 2010-   ✔ ✔   CHEVROLET ALL EQUINOX 2010-   ✔ ✔   CHEVROLET ALL EQUINOX 2007-2009   ✔ ✔   CHEVROLET ALL EQUINOX 2005-2006   ✔ ✔   CHEVROLET ALL EXPRESS 2008   ✔ ✔ HOURS CHEVROLET ALL EXPRESS 2003-2007   ✔ ✔   CHEVROLET ALL EXPRESS CUTAWAY 2008   ✔ ✔ HOURS CHEVROLET ALL GRAND AM 1998-   ✔ ✔   CHEVROLET ALL HHR 2008   ✔ ✔   CHEVROLET ALL HHR 2005-2007   ✔ ✔   CHEVROLET ALL HORNET 2017-   ✔ ✔   CHEVROLET ALL HORNET -2016   ✔ ✔   CHEVROLET ALL IMPALA 2006-   ✔ ✔ HOURS CHEVROLET ALL IMPALA 2000-2005   ✔ ✔   CHEVROLET ALL IMTRIGUE 1998   ✔ ✔   CHEVROLET ALL LACETTI 2010   ✔ ✔   CHEVROLET ALL MALIBU 2017-   ✔ ✔   CHEVROLET ALL MALIBU 2010-   ✔ ✔   CHEVROLET ALL MALIBU 2008-   ✔ ✔   CHEVROLET ALL MALIBU 2004-   ✔ ✔   CHEVROLET ALL MALIBU XL 2017-   ✔ ✔   CHEVROLET ALL MONTANA 2006-   ✔ ✔ HOURS CHEVROLET ALL MONTANA 2000-2005   ✔ ✔   CHEVROLET ALL MONTE CARLO 2006-   ✔ ✔   CHEVROLET ALL MONTE CARLO 2000-2005   ✔ ✔   CHEVROLET ALL ONIX 2012   ✔ ✔   CHEVROLET ALL ORLANDO 2012   ✔ ✔   CHEVROLET ALL PRISMA 2012   ✔ ✔   CHEVROLET ALL S10 2012   ✔ ✔   CHEVROLET ALL S10 1998-   ✔ ✔   CHEVROLET ALL S10 1997-1998   ✔ ✔   CHEVROLET ALL SILVERADO 2017-   ✔ ✔   CHEVROLET ALL SILVERADO 2014-2016   ✔ ✔   CHEVROLET ALL SILVERADO 2007-   ✔ ✔   CHEVROLET ALL SILVERADO 2003-2006   ✔ ✔   CHEVROLET ALL SILVERADO 1997-2001   ✔ ✔   CHEVROLET ALL SONIC     ✔ ✔   CHEVROLET ALL SONIC 2012   ✔ ✔   CHEVROLET ALL SPARK 2014   ✔ ✔   CHEVROLET ALL SPIN 2012   ✔ ✔   CHEVROLET ALL SPIN 2014   ✔ ✔   CHEVROLET ALL SUBURBAN 2017-   ✔ ✔   CHEVROLET ALL SUBURBAN 2014-2016   ✔ ✔   CHEVROLET ALL SUBURBAN 2007-   ✔ ✔   CHEVROLET ALL SUBURBAN 2003-2006   ✔ ✔   CHEVROLET ALL SUBURBAN 1998-2002   ✔ ✔   CHEVROLET ALL TAHOE 2017-   ✔ ✔   CHEVROLET ALL TAHOE 2014-2016   ✔ ✔   CHEVROLET ALL TAHOE 2007-   ✔ ✔   CHEVROLET ALL TAHOE 2003-2006   ✔ ✔   CHEVROLET ALL TAHOE 1998-2002   ✔ ✔   CHEVROLET ALL TRAX     ✔ ✔   CHEVROLET ALL TRAILBLAZER 2019-   ✔ ✔   CHEVROLET ALL TRAILBLAZER --2019   ✔ ✔   CHEVROLET ALL UPLANDER 2005-2009   ✔ ✔   CHEVROLET ALL VECTRA     ✔ ✔   CHEVROLET ALL VENTURE 2000-   ✔ ✔   CHEVROLET ALL VOLT 2012   ✔ ✔   How to change mileage by GODIAG GD801 ODO Master? please refer to this post: GODIAG GD801 ODOMASTER Mileage Correction Guide+ Car List For more car models, please feel free to contact our customer service. Whatsapp: +86 15377698251 Skype: GoDiagShop.com Email: sales@GoDiagShop.com
  4. One Piece Audi smart key with one-time calculation service New release in market I bought it and now show you all: Contact Information: Whatsapp: +86-15972933706 Email: Sales@EOBDtool.co.uk Skype: eobdtool.co.uk
  5. Q: Does Vident Iauto 702Pro support injector coding for Peugeot 308 1.6 HDi de 2012? A: Yes, iauto 702 pro Peugeot supports 31 special functions incl. injector coding. The car model is supported. Please check the newest iAuto702 Pro car list for Peugeot as below. Function Car maker Car model Car year INJECTOR CODING PEUGEOT 206 1998-2001 INJECTOR CODING PEUGEOT 206 MUX 2001-2008 INJECTOR CODING PEUGEOT 207 CAN As of 2007 INJECTOR CODING PEUGEOT 207+ As of 2012 INJECTOR CODING PEUGEOT 208 As of 2012 INJECTOR CODING PEUGEOT 208 ai91 As of 2012 INJECTOR CODING PEUGEOT 301 As of 2013 INJECTOR CODING PEUGEOT 307 VAN 2001-2005 INJECTOR CODING PEUGEOT 307 CAN As of 2005 INJECTOR CODING PEUGEOT 308 As of 2007 INJECTOR CODING PEUGEOT 308 4 portes As of 2007 INJECTOR CODING PEUGEOT 308_T9 As of 2012 INJECTOR CODING PEUGEOT 407 2004-2010 INJECTOR CODING PEUGEOT 408 As of 2010 INJECTOR CODING PEUGEOT 508 As of 2011 INJECTOR CODING PEUGEOT 508 RXH As of 2011 INJECTOR CODING PEUGEOT 508 HYbrid4 As of 2011 INJECTOR CODING PEUGEOT 607 R 2004-2010 INJECTOR CODING PEUGEOT 807 CAN As of 2005 INJECTOR CODING PEUGEOT 1007 VAN 2005-2006 INJECTOR CODING PEUGEOT 1007 CAN 2006-2009 INJECTOR CODING PEUGEOT 2008 As of 2013 INJECTOR CODING PEUGEOT 3008 As of 2009 INJECTOR CODING PEUGEOT 3008 HYbrid4 As of 2009 INJECTOR CODING PEUGEOT 3008 Chine As of 2009 INJECTOR CODING PEUGEOT 4007 As of 2008 INJECTOR CODING PEUGEOT 5008 As of 2010 INJECTOR CODING PEUGEOT BOXER 3 2006-2011 INJECTOR CODING PEUGEOT BOXER 3 Minibus As of 2006 INJECTOR CODING PEUGEOT BOXER 3 EURO 5 As of 2011 INJECTOR CODING PEUGEOT EXPERT 2 1995-2007 INJECTOR CODING PEUGEOT EXPERT 3 As of 2007 INJECTOR CODING PEUGEOT EXPERT (KO) As of 2016 INJECTOR CODING PEUGEOT PARTNER 1997-2008 INJECTOR CODING PEUGEOT PARTNER B9 As of 2008 INJECTOR CODING PEUGEOT PARTNER Electric (B9e) As of 2012 INJECTOR CODING PEUGEOT RCZ As of 2010 INJECTOR CODING PEUGEOT TRAVELLER As of 2016 It’s easy to operate. Step 1: Connect vident iauto702 pro-multi-application service tool to the vehicle via the main cable properly Step 2: Enter the Application main menu to select the “Injector” option Step 3: Read the related instruction and follow it to do. If you don’t know the specific operation guide, please ask our customer service for help. Whatsapp: +86-15972933706 Email: Sales@EOBDtool.co.uk Skype: eobdtool.co.uk www.eobdtool.co.uk
  6. In the last post, foxwelleshop.com has confirmed that Foxwell NT530 successfully reset EPB on 2019 HONDA ACCORD. Today, we will share another test report on the 2019 Honda Odyssey. First comes with the video. Sorry! The video quality is low (unclear). For your convenience, refer to the details in words as below. Note: The device we used is Foxwell NT510 Elite, but Foxwell NT530 Honda also supports the same function for the same car. Step-by-step guide: Make sure the connection between the Foxwell OBD2 scanner and the vehicle via the main diagnostic cable is proper Operate on Foxwell scanner Select “Honda”-> “Smart VIN” to detect the vehicle info automatically Read out the vehicle is HONDA Odyssey 2019 (General) and shows the related VIN, equipment manufacturer code. Select “Control Modules”-> “Brake Control System (BS)”-> “ELECTRONIC BRAKE CONTROL SYSTEM (EPB)”-> “Special Functions”-> “BRAKE PAD MAINTENANCE MODE” Turn the ignition switch on The function is used in rear brake pad maintenance. Check the following conditions are fulfilled: l Stop the vehicle l Release parking brake l Battery voltage is over 10.0V Go to the next step, brake pads are in the normal control position, then execute pad exchange mode. Note: The execution time takes about 25 seconds at the maximum. EPB system transits to pad exchange mode, then performs rear brake pad maintenance. When the pad maintenance is completed, return to the normal brake pad position. Now the EPB system transits to normal pad position. The function procedure is finished. Turn off the ignition switch Done! Available link to get Foxwell NT530 multi-system scanner with 1 free car software (US/EU Ship No Tax): https://www.foxwelleshop.com/wholesale/foxwell-nt530-multi-system-scanner-with-1-free-car-make.html
  7. Autel Scanner MaxiCOM MK808, one of the most versatile OBDII diagnostic scan tools in the market, This article will show you how to bleed abs brakes by autel mk808. Firstly, let’s know when and why you should bleed the ABS brake system. 1.When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity. 2.If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS. Now, let’s see how to bleed the brake system by Autel MK808. Take 2017 Hyundai (Korea) Accent (RB) as an example Connect MK808 to the corresponding vehicle via the main cable properly Enter “Brake Bleed” service function Select Asia-> Hyundai-> Automatic selection Then click “Read” to acquire VIN directly Select Hyundai (Korea) and confirm the vehicle info detect out Select Hot functions-> Brake bleed-> HCU Air bleeding mode Ensure solenoid valve status: closed and motor pump status: Off, then continue When all normally closed (NC) valves and the pump motor are activating, depress the brake pedal to floor. When pump motor activation stops, release the brake pedal. Repeat until the time reached 60s. Now the ABS brake bleed on MaxiCOM MK808 is done! Besides Hyundai (Korea), the Autel Maxicom Mk808 OBD2 scan tool also supports Hyundai (Europe/General/USA) brake bleed special function. Check the specific car model, please visit https://www.autel.com/vehicle-coverage/coverage2
  8. When key programmers such as Autel im508 key programmer or im608 autel stop working. This may be caused by an application or tablet, and you need to refresh the device with the corresponding flash file provided for different situations Need to know!!! 1.When open the Autel tablet shell, please roll in the hay slowly. don't pull the wire inside. 2.When installing the shell back, please align before installation. don't touch the motherboard components to cause collision parts. Step 1: Open the duvet on the rear of Autel IM508 or Autel IM608 Remove the battery in order that you'll insert the SD card Note: Sometimes your device must be sent back to repair, you’d better remove the battery using the tactic above before sending. The following location marked is where the SD card is placed. Step 2: Unzip the corresponding flash file and put the unzipped file in the SD card Step 3: Insert the SD card in the location above Step 4: Reboot the device SD card format requirement: TF card, 4G and above, FAT32 format That’s all! If you have any problem with Autel MaxiIM IM508 or other devices, please feel free to contact our customer service. Contact info: Whatsapp: +86-15972933706 Email: Sales@EOBDtool.co.uk Skype: eobdtool.co.uk www.eobdtool.co.uk
  9. It has been tested and verified by eobdtool.co.uk engineer that GODIAG V600- BM can perfectly diagnose BMW FEM/BDC module with GODIAG FEM/BDC Programming Test Platform. Case: After press [F1] reset button on GODIAG V600 BM, it needs to update the license, otherwise, the car cannot be tested. Solution: Use GODIAG FEM/BDC Test Platform to supply power to V600 BMW, and connect with FEM/BDC module and V600- BM to update V600 BM license and check if the BMW diagnosis function is normal.  All devices required: GODIAG V600- BM diagnostic tool with BMW ICOM software GODIAG Test Platform for BMW FEM/ BDC Programming (with OBD2-DB25 cable) BMW FEM/BDC module (has removed from the car) Computer with a network cable Connection: First, connect CON7, CON8, and Power connector of GODIAG FEM/BDC Test Platform to the corresponding positions of BMW FEM/BDC module Next, connect V600-BM with GODIAG FEM Test Platform via the OBD2- DB25 cable Finally, connect V600 BM with the computer via the network cable Main operation steps: Step 1: Open ITOOL Radar software to check the license status Step 2: Open STTech.AnyVCI.UpdaterStarter.exe to update V600- BM license Step 3: Open ITOOL Radar software again to check the newest license info Step 4: Run BMWGroup ISTA software to diagnose FEM/BDC module Step 1: Open ITOOL Radar software to check the license status The V600-BM has been connected to the computer. When you open the iToolRadar software, the active services will show “any- vci” service. So you need to update the license, otherwise, the car cannot be tested. Step 2: Open STTech.AnyVCI.UpdaterStarter.exe to update V600- BM license You can log in with an available account. If you don’t have an account, you need to register first. Click “Register a new user” and enter the full user info incl. user name (email), password, and your V600-BM SN and product key. Then click “Register” to finish the registration job Note: The serial number and product key can be found in the password paper which comes with the GODIAG V600-BM package. Connect your V600-BM, click “Yes”. When the device has been connected successfully, click “Advanced features” to update the license and wait till it’s done. Step 3: Open ITOOL Radar software again to check the newest license info Now V600 BM has been updated, and it adds the BMW- VCI@ICOM service with “Free” status and ivm.connector services in the “Active Service”. It means the license of the V600 BMW is normal and the car can be tested now. Step 4: Run BMWGroup ISTA software to diagnose FM/BDC module Select Operations-> Read Out Vehicle Data-> Complete identification The related GODIAG V600- BM info appears on the screen, including device ID, color, type, VIN, connection, KL15 [V] and state info, click “Set up connection” to continue It shows the ISTA workshop system operating warning, just click “OK” to the next step Readout current vehicle details Show the corresponding control unit tree Click “Display fault memory” to see the specific fault codes And then click “Calculate test plan” to view the related service plan Result: GODIAG V600 BM with BMW ICOM software can successfully diagnose FEM/BDC module and quickly read fault codes after updating license using GODIAG BMW FEM/BDC programming Test Platform. All GODIAG devices are used above are available at eobdtool.co.uk. GODIAG V600-BM Diagnostic and Programming Tool for BMW with BMW ICOM Software 500GB HDD: https://www.eobdtool.co.uk/wholesale/godiag-v600-bm-with-software.html GODIAG BMW FEM/ BDC Programming Test Platform with OBD2-DB25 cable: https://www.eobdtool.co.uk/wholesale/godiag-test-platform-for-bmw-fem-bdc-programming.html
  10. Tutorial: how to do oil service reset on a 2007 Volvo S40 by Foxwell GT60 Plus? Procedure: Connect GT60 Plus to the Volvo S40 properly, and start to operate on the tablet. Tap “Maintenance”-> “OILRESET” Read the service lamp reset instruction and start to do Select car region, car brand, car model and car year: Europe-> Volvo-> Auto Reset-> S40 (04- )-> 2007 Turn ignition on and reset the service reminder indicator (SRI) by clicking the “Start” button Click “Reset” to reset SRI GT60 Plus reset oil for S40 successfully, and the value has changed For your convenience, watch the video to understand clearly. Done! If you have any problem with Foxwell GT60 Plus diagnostic platform, please feel free to contact us. Whatapp: +86 15377698251 Email: sales@FoxwelleShop.com Tel: +86 15377698251
  11. In this post, questions including Xhorse VVDI Key Tool Max token and how to update Key Tool Max & Mini OBD Tool will be answered through question and answer. VVDI Key Max Features: 1: Use KEY TOOL MAX to connect the dolphin to cut the key for the customer. 2: Support Generate transponder and remote. etc 3: Enter the car directly using KEY MAX+MINI OBD for matching. The entire process can be seamlessly connected without switching devices. 4. KEY TOOL MAX +MINI OBD TOOL can not only match the chip remote control of imported domestic cars, smart card, but also Toyota H chip will be released first on KEY TOOL MAX. FAQs: Q: Does VVDI KEY TOOL MAX device needs software or hardware annual update fees? A: No need for any extra fees. Q: I want to clone the remote control of the 2008 Eclipse in Mitsubishi. Is it possible to copy the remote using general or special copying? Can Mitsubishi’s transponder also copy?’ A: The key tool max will copy Mitsubishi’s transponder, you can download the Xhorse app and check the available list. But it won’t copy the remote key. Q: Does Xhorse VVDI Key Tool Max need to be online to copy the Toyota 8A? And how about the token? A: if you use Xhorse super chip, the server will be token free. for other chips need to charge 100 bonus points. Q: What is the difference between VVDI Max and VVDI MINI? A: VVDI Max can work with VVDI Mini OBD Tool, which has its own screen. ID48 96bit function needs to generate 10 xhorse remote keys to get. VVDI MINI ID48 function is free, and one token free every day. VVDI MAX and vvdi mini transponder/remote function is similar. But for some keys that need to generate online, only VVDI2 or VVDI Max is OK. Note: VVDI Key Tool Max User Manual Q: How to active the 96bit 48 clone function? A: Please use VVDI Max to generate Any Xhorse remote key 10pcs. After collect bonus points, the server will open the ID48 96bit function freely after one hour. As the pictures show below: 1.1.Turn on the machine and log in account 2.2.Turn to keytool max option and use generate 10 pcs xhorse remote and collect the points, you can touch the area of ‘Bonus Points’ for collect points, you can earn the points for the first time to use the remote from xhorse. 3. An hour later after collect points, the 96 bit 48 clone function will be activated, you can check it in your keytool max machine Remark: xhorse has 4 kinds of remote: wire remote, wireless remote, super remote, smart key remote, Generate each kind of remote will earn the different value of points Wire remote = 25 points Wireless remote = 40 points Super remote = 40 points Smart key remote = 60 points Thanks to eobdtool for technical support
  12. This article explains how to use OBDSTAR X300 DP Plus to program Toyota A8 all keys lost. The following is the procedure: Click “DiagProgram” button and accept the disclaimer. Click “IMMO”>>“Asia”>>“TOYOTALEXUS”>>“TOYOTA LEXUS V32.36”. Choose “Manual Select System”>>“PROXIMITY”>>“TYPE 5(ALL SMART KEYS LOST)”. Choose “Read EEPROM” and click “Enter”. Read the instructions on the screen, then start to read (backup) vehicle EEPROM data. When reading data is finished, rename the file and save it. When the vehicle EEPROM data backup was successful, please execute the “Make Simulated Card” function to generate a simulated key with all keys lost. This function is available by connecting the server, so please ensure that the Internet connection is normal. Choose vehicle EEPROM data file we’ve just saved, say “ Toyota_2016xxxxx.BIN” and click “Enter” to get network data. When getting network data is finished, connect KSIM simulated card to OBDSTAR X300 DP Plus, then the A8-type simulated card will be generated. When generating simulated card is successful, click “Enter” and move KSIM simulated card close to the start button and try to light the meter.Now, we can see that KSIM simulated card can light the meter normally. Source:http://blog.eobdtool.co.uk/obdstar-x300-dp-plus-programs-toyota-a8-all-keys-lost/
  13. It’s not difficult to print report by Autel Maxisys scan tool such as MS906BT. What you should do is to install Adobe Reader and Maxi PC suite (Maxis’s printer). Just follow the step-by-step guide to operate. What you will need: Autel MS906BT PC Printer Note: Make sure all devices above have been connected to the same network. How to do: 1.Download “Adobe Reader DC” if you don’t already have it on the computer 2.Visit https://www.autel.com/-> select “Support” and “Download”-> download “Maxi PC Suite” 3.Once it’s downloaded, open the folder to install “setup launcher” It’s easy to install. Select the language and click “OK”, operate by “Next” until the process finish. 4.Then there are two icons appear on the screen “Maxi PC Suite” and “PC link” It needs to open “PC link” for printing. When it asks if allow the app to make changes to your device, just click “Yes” to continue. Then it will show “maxis’s printer” icon at the bottom right corner of the computer 5.Connect Autel MS906BT with computer via USB cable Select “MaxiSys”-> “Shop Manager” –> “vehicle history” -> choose the report you want to print Select “Print” by pressing the arrow icon on the top right corner Select the printer which can print the file Then the report will be sent to the Printer connected to the PC Finally, print the file successfully Please kindly notice: As long as all three devices are connected to the same network, printing from your MaxiSys should be pretty straight forward. If you are still having problems, please perform the following checks: Is your PC printer queue full? You won’t be able to print if your queue is full. Is your Printer turned on? Is the MaxiSys Printer driver running on the PC you have selected? Have you entered your shop information via the Shop Manager? Sometimes you need to enter this depending on the report type. Is there paper in your Printer? Is your PC turned on? Is your Network router on and communicating with your Printer? Run a test print page to make sure your PC can print to your printer. Are you printing to the correct PC on the network? Other PC’s may be connected to the same network, but print files to a different printer. More posts you may be interested in: Autel MS906BT Register+ Update+ Using Tips+ Car List+ Review AUTEL MaxiSys MS906BT FAQs: Adjust speed limiter, Write VIN number Autel MaxiSys Devices VS Autel Maxidas DS808 Source:http://blog.eobdtool.co.uk/how-to-print-report-from-autel-maxisys-ms906bt/
  14. Do your skills to activate Launch X431 HD3 and mix it to X431 V+? After combining HD3 module with X431 V+ software, will both X431 V+ and HD3 software icon appear on the screen? Go ahead to read this post and find the corresponding answer. This is the question many users asked recently: I have a Launch X431 V+ tablet with X431 Heavy Duty Module. I even have bound HD3 truck module to X431 Pro3 software. But once I boot the tablet, there's only X431 V+ software icon display on the screen. Enter “Local Diagnose” interface, I don’t see “HD” option. Enter “User Info”, and it shows two serial numbers as below. Is it normal that only X431 V+ software icon appears but HD3 doesn’t? Eobdtool.co.uk engineer replied: Yes, it’s normal. many purchasers think that there'll be two software icons appear on the tablet screen. In fact, only X431 V+ software icon will appear. If you would like to diagnose HD3 truck, just select the heavy duty VCI choice to do. Attach the guide to register and activate Launch X431 V+ HD3. Note: this guide applies to those that have an X431 Pro3 diagnostic tool of 12V coach configuration and shall extend the diagnostics of economic vehicles (truck). Please confirm that the diagnostic tool is correctly connected to the web before proceeding with this step. 1.Register Launch X431 Pro3 Steps: Create an account-> Activate VCI-> Download software Click here to see the small print. 2.Activate X431 HD3 VCI Enter “User Info” launch x431 hd3 Select “Activate VCI” Input the serial number and activation code of HD3 truck module Note: the SN and activation code are often found within the envelope which comes with X431 Pro3 HD3 package. x431 activate vci Once activation is completed, it means the HD3 truck module has been sure to X431 V+ successfully. Tech support: www.eobdtool.co.uk Read More: How to Register and Update Launch X431 V+ (Pro3)? Newest Launch X431 V+ HD3 Camera Scan VIN+ HD_DEMO+ Car List Launch X431 V 8 inch VS X431 V+ X431 PRO3
  15. Black Friday Sales 2020 (Valid Nov 24th-30th) at eobdtool.co.uk is launching now. Here are some top-selling products with different brands in 2020: Item No. Product name Original price (Euro) Black Friday sale (Euro) Discount Mark SV86-F V6.7.5 Xhorse VVDI2 Full Version with All 13 Software + Free Mini Key Tool 1,599.00 1,403.00 12% Nov.27th-Nov.29th: €1,227.00 SL437 Xhorse Dolphin XP005 Automatic Key Cutting Machine 1,711.00 1,591.00 7% SK283-B XHORSE VVDI BIMTOOL PRO 964.00 876.00 9% SV86-F+SK177-D Xhorse VVDI 2 Key Programmer Full Version Plus VVDI Prog 1,681.00 1,666.00 1% SO537 GODIAG GT100 AUTO TOOLS OBD II Break Out Box ECU Connector 96.00 87.00 9% SP78 Yanhua Digimaster 3 with Unlimited Tokens 841.00 782.00 7% SK282-B Autel XP400 Pro for Autel IM508/IM608 526.00 489.00 7% SP351 Autel MaxiCOM MK908 1,518.00 1,403.00 8% XN-SP354 Autel MaxiPro MP808K 701.00 666.00 5% SK237-B Autel MaxiIM IM508 with XP200 1,052.00 978.00 7% SK242-BD Autel MaxiIM IM608+ Autel G-BOX2 with XP400 and J2534 ECU Reprogrammer 2,604.00 2,587.00 1% VX16-B OEM Porsche Piwis 3 Tester III 1,599.00 1,403.00 12% SK297 Xtool X100 PAD3 859.00 798.00 7% SK297+SK301 X100 PAD3 Plus Xtool KC501 1,499.00 1,315.00 12% SK182-B Xtool X100 PAD 376.00 332.00 12% SP100-E1+SS221-7+SO489+SS175 MB SD C4 DoIP with V2020.09 500GB HDD Plus Lenovo X220 Laptop 4GB Memory 613.00 569.00 7% SV69-F SVCI 2020 Full Version with 22 Latest Software VAG Special function 376.00 349.00 7% SL442-B V2020.09 2M2 Magic Tank(X6 Plus) Automatic Car Key Cutting Machine 1,254.00 1,227.00 2% SP100-E1 MB SD C4 Plus Without Software 420.00 390.00 7% SP353 Humzor NexzDAS Pro Bluetooth 10inch Tablet Full System 245.00 227.00 7% Promotion 1: EOBDTOOL.co.uk 7% off Devices including: VXDIAG VCX SE BMW, Dolphin XP005, Condor XC002, Condor XC009, CGDI Prog BMW MSV80, CGDI Prog MB, Foxwell NT530 BMW, Volvo Vocom 88890300, VVDI super chips, VVDI MB Tool, Xhorse VVDI MB mini ELV, Autel G-Box2, etc. Promotion 2: EOBDTOOL.co.uk Flash sales Devices including: Godiag GT100 Thinkdiag, Thinkcar2 (Thinkdriver) SVCI J2534, SVCI ING Lonsdor K518S, Lonsdor KH100 GM tech2, GM MDI2 Launch X431V+ Pro3, X431 V Pro, Launch X431 Pro Mini Xhorse VVDI Prog, Xhorse VVDI MB BGA Tool Autel IM608, Autel MaxiCOM MK908, Autel MK908P, Autel MP808K, Autel Robotics EVO Xtool X100 PAD, X100 PAD3, XTOOL X100 PAD3 Plus XTOOL KC501 VXDIAG VCX NANO for Ford Mazda IDS V118, VXDIAG VCX NANO VAS-5054 ODIS OBDSTAR ODOMaster, OBDSTAR X300 PRO4, OBDSTAR X300M, OBDSTAR X300 DP Plus Ktag V7.020 EU version, V2.53 KESS V5.017 EU Version, Carprog, V54 FGTech Galletto 4 master 0475 CGDI Prog MB Benz key programmer, OEM Orange 5, Digiprog 3, Yanhua Mini ACDP with BMW full package, Foxwell NT650 Elite, Xprog-M 6.12, Scania VCI3, HUMZOR NEXZDAS PRO Bluetooth 10inch tablet, 2M2 Magic Tank, Vident iauto702 Pro, MB SD C4/C5, etc. Wish you a happy shopping at eobdtool.co.uk! If you have any question, please feel free to contact our customer service. Whatsapp: +86-15972933706 Email: Sales@EOBDtool.co.uk Skype: eobdtool.co.uk Source:http://blog.eobdtool.co.uk/eobdtool-co-uk-black-friday-sales-2020-up-to-20-off/
×
×
  • Create New...